The Dual Supply Starter Unit makes it possible to independently control two groups of luminaires, each separately supplied by its own protective device at the distribution board. The desired supply split point is factory configured to order. In common with all units in the eZeBox range the type of control can be simple on/off or dimmable. If using third party control products (i.e. switches/sensors) they will require hard wiring to the input terminals provided, but for ease of installation we strongly recommend selecting the appropriate control from our extensive range of plug-in control devices. Reserve one outlet on each side of the supply split for this method.
Use for installations requiring an essential and a non-essential supply such as hospitals, or for load shedding applications.
Note: Supplies must be on the same phase.
Details on Plugs and Pre-Wired Luminaire Leads
Use as a spare outlet (control B), but for more outlets plug in an
Expansion Unit – and utilise the existing ‘control B’
OR a
Tap-off Unit – which will require independent ‘plug-in control’.
Note: In either case units can plug in direct ‘unit to unit’ or via
a suitable interconnecting lead – Expansion Leads or Tap-off Leads
Note: If required it is possible to ‘PELV link’ between plug-in control devices to consolidate the two supplies to one common control. Contact Flex Connectors for more details.
