Where a Tap-off Unit is required to be remote from its preceding unit, plug them together via a Supply Tap-off Lead. This combination provides the perfect solution for distributing one circuit supply over perhaps several rooms or areas, thus saving valuable installation time, as only the original source unit requires fixed wiring termination.
Using a Supply Tap-off Lead also opens up the possibility of connecting to sources other than Starter Units. For example: Using a Single Socket Outlet as the initial source simplifies and standardizes the first fix leaving complete flexibility to choose the correct plug-in unit/s at the second fix.
Alternatively, and for the complete interconnection system, use a Hub Unit which offers 6 independent supplies from one unit
Note: Inline Tap-off leads can also pick up an initial supply from Single Sockets or Hub Units.
Note: Supply Tap-off Units can only be controlled by a plug-in control device
Supply Tap-off Leads are available in 3 or 4 core depending on whether an emergency test is required locally on each unit, or globally across one unit to the next
4-Core
3-Core
All Tap-off Leads are 16A rated and are available in 1.50mm² or 2.50mm² LS0H flexible cable or 1.50mm² or 2.50mm² LS0H cores in 16mm dia. plastic flexible conduit.
