Flex Connectors

home > Technical > flex7 Control Devices – Technical Details

flex7 Control Devices – Technical Details

4-Core Pre-wired Luminaire Leads wiring diagram

Rating
Supply Voltage: Nominal 230V~ 50Hz, Class 2 device,
Max parasitic current: with sensor head 9mA, without sensor head 7.5mA
Manufactured in grey PA6 UL94 V-0 rated, Non-halogen
Conformity: LDV-73/23/EEC: EMC-89/336/EEC
Operating range: -10 to 40°C
Tested to BS5733

Single relay device Load
Fluorescent & Incandescent Lighting :6A
Compact Fluorescent Lighting :3A
Dual relay device Load
Load on Lighting Circuit – R1
Fluorescent & Incandescent Lighting :6A
Compact Fluorescent Lighting :3A
Load on Lighting Circuit – R2
Fluorescent & Incandescent Lighting :6A
Compact Fluorescent Lighting :3A
Total Maximum Load :10A R1&R2

Maximum number of Ballast
DSI Digital control :25
DALI Digital control :25
Analogue 0-10V control :25

We’re back from Frankfurt

May 2, 2012

Well, we made it! 6 days of mostly standing and 2 days of travelling later and Frankurt Light and Building 2012 is officially over. We had a great time, met some great people, and got a few blisters along the way. This was our first time at Light and Building, and we thought it went pretty well.

Visit us at Light and Building 2012

January 18, 2012

Flex Connectors are exhibiting at Frankfurt Light and Building 2012 in April. The show runs from 15th to the 20th April this year, and is the world’s biggest tradefair for lighting and intelligent buildings. We’ll be in Hall 9.0, stand F75. So come say hello if you’re attending the show – and if we like you, we might even give you a free pen!

flex7 – Light Entertainment

October 20, 2011

Flex Connectors’ flex7 lighting connection and control system has been installed at the prestigious new BBC drama village in Cardiff Bay.

The site is 170,000 sq ft (15,800 sq m), and will eventually be home to productions including Casualty, Pobol y Cwm, and Doctor Who.

Flex Connectors – Made in Britain!

October 7, 2011

We’ve added the official ‘Made in Britain’ logo to our website to show our support for Stoves’ campaign for a standard marque to be applied to all products manufactured in the UK. The logo was introduced in an effort to give consumers a clearer idea of where their products originate from.