Lighting Connection – Why Choose flex7? 2017-03-13T11:44:18+00:00

Lighting Connection – Why Choose flex7?

Lighting connection products from Flex Connectors, can save you time, energy and money on your building project.

The flex7 System is a fully modular, pre-fabricated lighting connection system that utilises simple plug-in connection. The plug-in nature of our product range means that there is less requirement for skilled labour on site, and products can be installed in a fraction of the time that a traditionally wired system could be completed.

Request Catalogue
Download Catalogue

Or give us a call on: 0208 580 1066

flex7 lighting connection and control

Lighting connection – providing power to your circuit

Provide power to you lighting circuit using one of our extensive range of eZeBox connection boxes.

  • Time Saving
  • Labour saving
  • Simple plug-in lighting connection system
  • 7-pole as standard
  • Full fixing kit supplied free of charge
  • Robust design
  • Large wiring compartment
  • Straight forward wiring configuration
  • 2, 4, 6, 8, 10 & 12 way options
  • Modular system
lighting connection box from flex7

Once you have connected power to your first lighting connection box you just need to plug-in one of our pre-wired luminaire leads to connect each of your luminaires.

Each type of eZeBox connection box is available in 2, 4, 6, 8, 10 and 12 ways. If you decide that you need extra outlets to connect further luminaires, then there’s a simple solution: Each eZeBox comes with a spare socket on the end. This can be used to plug in an eZeBox Expansion Box, which simply expands the capacity of your circuit, providing you with extra outlets.

You may wish to add an entirely separate circuit to power a new group of luminaires. To do this, simply plug-in an eZeBox Tap-off Box. The Tap-off Box borrows power from the initial eZeBox, but creates an entirely independent circuit.

Easy To Reconfigure

modular

Once your lighting connection system is in place, it’s easy to reconfigure the layout should end user requirements change. Because the system is modular and uses plug-in connection, replacing or moving products is a simple matter of unplugging, and plugging-in as needed.

7-Pole As Standard

prewired-leads

All of our eZeBox lighting connection boxes are 7-pole as standard. This gives you the flexibility to change your lighting controls from on/off to dimming, without having to upgrade you connection box.

Read more about our lighting controls 

Full Fixing Kit Supplied

single-point-fixing-brackets

The eZeBox can be fixed to any surface using specially designed fixing brackets. The brackets can be fixed to solid surfaces, cable basket, trunking, drop rods, or conduit box. Each of the brackets is fixed with a single screw, meaning they can be aligned easily. Then snap-in your eZeBox.

Robust Design

eZeBox Connection Boxes are manufactured to BS 5733. The box is made from anodised aluminium extrusion, with molded outlets, and designed to cope with rough handling during transit and installation.

Read more about our lighting controls 

Lighting connection – plugging in your luminaires

Once power is connected to an eZeBox it’s just a matter of connecting your luminaires by plugging in one of our pre-wired luminaire leads, to complete your lighting connection circuit.

Our range of lighting connection plugs are available in 3, 4, 5, 6 & 7-pole versions. Plug a flex7 plug into one of our eZeBox connection boxes to make immediate electrical and mechanical connection. The strong mechanical latches on either side of the plug double up as finger grips. This makes it easy to remove a plug if needed.

We have a wide range of pre-wired lighting connection luminaire leads. All leads are available in LSHF cable, which is manufactured to BS EN 50525-3-11 so you can be assured that they will meet all safety standards required in public buildings.

  • Time Saving
  • Labour saving
  • Simple plug-in lighting connection
  • Strong mechanical connection
  • 3, 4, 5, 6 & 7-pole versions available
  • Available in LSHF or PVC cable
  • Large wiring space
  • Access for power screwdriver
  • Robust design
  • Range of fixing options
flex7 lighting connection Luminaire leads