| Call Us: +44 (0)20 8580 1066 | sales@flex7.co.uk
Timer Management Unit
The flex7 Timer Unit is designed to hold lights on for pre-set time periods during the day. A typical installation would involve holding certain lights on in a building – often those in corridors and circulation areas, during normal working hours, allowing them to revert to occupancy control at all other times.
Key features
- Use to keep luminaires on in specific parts of a building, at predetermined times of the day eg. all core areas are lit during normal working hours, and revert to occupancy control at all other times.
- The interface is a single channel / 7-day device and is connected to a Control Module via a plug-in Network Lead.
- Timed control of luminaires in multiple areas requires a Zone Splitter.
*The type of sensors used affects the way the lights behave during a timed on period:
Occupancy sensors
The lights will come ON and stay ON during the timed period (provided that if the sensor is fitted with an override switch, it is not in an ‘override off’ position).
Absence sensors
The lights will not turn ON as a result of the onset of a time period. However during the timed period, if they were ON, they will not timeout.
Absence sensors (with presence enabled)
As above except that lights will turn ON as a result of the onset of a timed period – provided the sensor was timed-out. (presence can be enabled using an frc/set remote control).
Note: Other possibilities exist for controlling networked sensors using the ftm100. Please contact technical support at Flex Connectors for design assistance
Ordering info
| Product description | Part number |
|---|---|
| Time management interface | FTM100 |
